VW Passat repair


+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
- 3. Engines
   + 3.1. Petrol engines of configuration of R4
   - 3.2. Petrol engine of configuration of VR6
      3.2.1. Technical characteristics
      3.2.2. General information
      3.2.3. Check of a technical condition of the engine
      3.2.4. Removal and engine installation
      3.2.5. Removal and installation of a head of the block of cylinders
      3.2.6. Repair of a head of the block of cylinders
      3.2.7. Pistons and rods
      3.2.8. Cranked shaft
      3.2.9. Replacement of epiploons of a cranked shaft
      3.2.10. Flywheel
      3.2.11. Drive of the gas-distributing mechanism
      3.2.12. Intermediate shaft
      3.2.13. Removal and installation of the oil pallet
      3.2.14. Oil pump
      3.2.15. Water pump
   + 3.3. Diesel engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
+ 13. Wheels and tires
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
+ 16. Body
+ 17. Electric circuits


Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Engines>> Petrol engine of configuration of VR6>> Removal and installation of the oil pallet
The oil pallet can be removed from the engine established on the car, in the following order:

Fig. 3.54. Forward and back covers of a cranked shaft, oil pallet: 1–cap of the oil channel; 2–block of cylinders; 3–cover of a drive of GRM; 4–bolt of fastening of a back cover of a cranked shaft; 5–back cover of a cranked shaft; 6–back epiploon of a cranked shaft; 7–laying of the oil pallet; 8–oil pallet; 9–stopper of a masloslivny opening; 10-bolt of fastening of the oil pallet; 11-forward cover of a cranked shaft; 12-bolt of fastening of a forward cover of a cranked shaft; 13-forward epiploon of a cranked shaft


– merge engine oil, having unscrewed a stopper 9 (see fig. 3.54 ) a masloslivny opening;
– will hang out the engine by means of the load-lifting mechanism;
– unscrew bolts of fastening and remove protection of the oil pallet;
– unscrew bolts of the 10th fastening of the oil pallet and remove the oil pallet 8 together with laying 7.
Installation of the oil pallet is carried out in sequence, return to removal. After installation fill in engine oil.