VW Passat repair


+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
+ 13. Wheels and tires
+ 14. Systems of heating, ventilation and conditioning
- 15. Electric equipment
   + 15.1. Technical characteristics
   15.2. Security measures at work with electric equipment
   + 15.3. Detection of not closed chain
   + 15.4. Storage battery
   + 15.5. Generator
   + 15.6. Starter
   15.7. Block of safety locks and relay
   15.8. Replacement of the lock of ignition
   + 15.9. Switches
   + 15.10. Combination of devices
   + 15.11. Internal lighting and lighter
   + 15.12. Headlights
   + 15.13. Windscreen cleaner
   15.14. Windscreen washers
   15.15. Cleaner of back glass
   + 15.16. Central lock
   - 15.17. Hatch
      15.17.1. Removal of the panel of the hatch
      15.17.2. Installation of the panel of the hatch
      15.17.3. Adjustment of a cover of the hatch on height
      15.17.4. Adjustment of the mechanism of a drive of a cable and parallelism of a cover of the hatch
      15.17.5. Adjustment of a closed position of the hatch
      15.17.6. Drainage equipment of the hatch
      15.17.7. Manual opening and hatch closing
+ 16. Body
+ 17. Electric circuits


Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Electric equipment>> Hatch>> Adjustment of the mechanism of a drive of a cable and parallelism of a cover of the hatch
Adjustment parallelism of a cover of the hatch carry out only after removal of a cable and a leading gear wheel. Hook and remove a plafond of internal lighting, uncover the mechanism of a drive of a cable and unscrew the hidden screws of fastening of the mechanism of a drive.

       PREVENTION
Before removal of the mechanism of a drive of a cable disconnect minus a wire from the plug of the storage battery. At adjustment of parallelism of a cover of the hatch the gear wheel of a drive should be deduced from gearing.

Adjustment make in the following order:
– displace cables and back directing cables back;
– establish axes in the situation corresponding to the closed cover;

Fig. 15.73. Check of correctness of installation the drive mechanism in the situation corresponding to the closed hatch: 1–axes; 2–clamp levers


– establish levers of a clamp 2 (see fig. 15.73 ) covers so that they entered into the directing.

       PREVENTION
Directing expose only by shift back, to the labels specifying the provision of complete closing of the hatch.

       PREVENTION
It is forbidden to displace directing forward.

Adjustment of the mechanism of a drive of a cable. Before adjustment of the mechanism of a drive of a cable, the mechanism of a cover and the mechanism of a drive of a cable should be established in the situation corresponding to the closed cover. The mechanism of a drive of a cable is regulated by calculation of turns of a leading gear wheel.
When opening hatch (the cover of the hatch slides across) the gear wheel rotates clockwise and at complete opening rests against the limiter. From this final situation turn a gear wheel on 9 complete revolutions counter-clockwise therefore the hatch should be closed completely.
When opening hatch (the cover of the hatch bends) the gear wheel rotates counter-clockwise, and at complete opening rests against the limiter. From this final situation turn a gear wheel on 2 complete revolutions clockwise therefore the hatch should be closed completely.








429b39f6