Installation make in the following order:

Fig. 15.73. Check of correctness of installation the drive mechanism in the situation corresponding to the closed hatch: 1–axes; 2–clamp levers

– establish the mechanism of a drive of the hatch in the situation corresponding to the closed hatch, axes should be in limits of the sites designated by shooters (fig. 15.73) ;

Fig. 15.74. Fastening of a cover of the hatch: 1–screw; 2–adjusting washer; 3–adjusting pins

– establish on pins 3 (fig. 15.74) adjusting washers 2 with longitudinal cuts;

– slightly tighten screws;

– establish a hatch cover on the necessary height;

– tighten screws.