VW Passat repair


+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
+ 13. Wheels and tires
+ 14. Systems of heating, ventilation and conditioning
- 15. Electric equipment
   + 15.1. Technical characteristics
   15.2. Security measures at work with electric equipment
   + 15.3. Detection of not closed chain
   + 15.4. Storage battery
   + 15.5. Generator
   + 15.6. Starter
   15.7. Block of safety locks and relay
   15.8. Replacement of the lock of ignition
   + 15.9. Switches
   + 15.10. Combination of devices
   + 15.11. Internal lighting and lighter
   + 15.12. Headlights
   + 15.13. Windscreen cleaner
   15.14. Windscreen washers
   15.15. Cleaner of back glass
   + 15.16. Central lock
   - 15.17. Hatch
      15.17.1. Removal of the panel of the hatch
      15.17.2. Installation of the panel of the hatch
      15.17.3. Adjustment of a cover of the hatch on height
      15.17.4. Adjustment of the mechanism of a drive of a cable and parallelism of a cover of the hatch
      15.17.5. Adjustment of a closed position of the hatch
      15.17.6. Drainage equipment of the hatch
      15.17.7. Manual opening and hatch closing
+ 16. Body
+ 17. Electric circuits


Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Electric equipment>> Hatch




Fig. 15.70. Hatch and its elements: 1–cover sealant; 2–elevating framework of a cover; 3–screw; 4–a framework for horizontal shift of a cover of the hatch; 5–frame of an aperture of the hatch assembled; 6–drainage hose; 7–hidden screws of fastening; 8–mechanism of a drive of a cable; 9, 16 – a spring ring; 10-lift/limiter spring; 11-lift/limiter; 12-adjusting washer; 13-the screw with internal 6-faced shlitsa; 14-clamp lever; 15-spring


For access to the mechanism of a drive of the hatch for the purpose of repair or adjustment it is necessary to remove the external panel and to shift aside an elevating framework 2 (fig. 15.70) of a cover and a framework 4 for horizontal shift. The structure of a frame of the 5th aperture of the hatch as uniform knot includes the rails, directing a cable and cables. To replace a frame of the hatch it is necessary to remove a slip from salon and tselnolity the frame case.

       PREVENTION
It is forbidden to grease rails in a frame of the hatch with usual universal greasing. For this knot there is a special greasing with number according to the Volkswagen G 000 450 02 catalog.