VW Passat repair


+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
+ 13. Wheels and tires
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
- 16. Body
   + 16.1. General information
   16.2. Care of a body
   + 16.3. Insignificant damages of a body
   16.4. Considerable damages of a body
   16.5. Moldings, facing of wheel niches
   - 16.6. Cowl elements
      16.6.1. Cowl cover
      16.6.2. Holder of the lock of a cowl
      16.6.3. Cable of a drive of the lock of a cowl
   16.7. Forward and back bumpers
   16.8. Forward cross-section beam of a body
   16.9. Forward wing
   + 16.10. Luggage carrier elements
   + 16.11. Elements of a back door (cars with a body the versatile person)
   16.12. Hinges and locks
   16.13. Elimination of jingle of doors
   + 16.14. Elements of a forward door
   + 16.15. Elements of a back door
   16.16. Internal rear-view mirror
   16.17. Central console
   + 16.18. Combination of devices
   16.19. The receiver with coding system
   16.20. Perchatochny box
   16.21. Dashboard
   + 16.22. Forward seats
   + 16.23. Back sitting
   + 16.24. Seat belts
+ 17. Electric circuits


Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Body>> Cowl elements>> Cable of a drive of the lock of a cowl

Fig. 16.5. Mechanism of locking of a cover of a cowl: 1–cowl lock; 2–cable; 3–brackets of fastening of a cover of a cable; 4–a directing arm; 5–bracket; 6–sealing ring; 7–саморез; 8–lever of a drive of a cable


The mechanism of locking of a cowl is represented on fig. 16.5 .
Removal make in the following order:
– open and fix in open situation a cowl cover;
– unscrew screws of fastening of the lock and remove the lock 1;
– disconnect from the lock a cable 2;
– having unscrewed fastening screws, disconnect the handle of opening of a cowl in the car;
– take from the handle a cable;
– attach a thin strong cord in length about 90 cm by the internal end of a cable from the handle and accurately drag a cable in a motor compartment;
– disconnect a cable from brackets of fastening and take it.
Installation carry out to sequences, return to removal.