VW Passat repair

+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
+ 13. Wheels and tires
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
- 16. Body
   + 16.1. General information
   16.2. Care of a body
   + 16.3. Insignificant damages of a body
   16.4. Considerable damages of a body
   16.5. Moldings, facing of wheel niches
   + 16.6. Cowl elements
   16.7. Forward and back bumpers
   16.8. Forward cross-section beam of a body
   16.9. Forward wing
   + 16.10. Luggage carrier elements
   + 16.11. Elements of a back door (cars with a body the versatile person)
   16.12. Hinges and locks
   16.13. Elimination of jingle of doors
   + 16.14. Elements of a forward door
   + 16.15. Elements of a back door
   16.16. Internal rear-view mirror
   16.17. Central console
   + 16.18. Combination of devices
   16.19. The receiver with coding system
   16.20. Perchatochny box
   16.21. Dashboard
   + 16.22. Forward seats
   + 16.23. Back sitting
   + 16.24. Seat belts
+ 17. Electric circuits

Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Body>> The receiver with coding system

Fig. 16.67. The Heidelberg VI receiver with the coding. The receiver differs from former models existence of inscriptions on the forward panel and three handles – regulators of level of a signal, a strip and the top frequencies

Fig. 16.68. When blocking receiver on the display there is a SAF-e symbol

Some cars (fig. 16.67) is completed with the coded Heidelberg VI receiver , the four-digit fixed code of the receiver is appropriated by manufacturer. At the food termination from the battery irrespective of the reason, for example, at a battery detachment, removal of a safety lock of the receiver or the receiver, the special electronic device locks the receiver which becomes disabled. When blocking receiver on the display there is «SAF-e» designation (fig. 16.68) .
After food restoration for turning on of the receiver it is necessary to enter a protective code. The receiver perceives only the code which has been written down by the manufacturer. It is impossible to change this code. For restoration of operability of the Heidelberg VI receiver:
turn on the receiver (on the display there should be a SAF-e symbol);
press the AM/FM and SCAN buttons and hold them while on the display there will be no 1000 symbol;

Too long keeping of buttons, or casual repeated pressing are interpreted as incorrectly entered code.

enter a code, pressing buttons of a program choice of the stations, thus gathered code will appear on the display;

After two and more unsuccessful attempts of a raskodirovka (for example, after introduction of the wrong code) the receiver is blocked, and its working capacity will not manage to be restored even introduction of the correct code. In this case leave the receiver included for a long time, about an hour then there will be a blocking dumping.

press the AM/FM and SCAN buttons. Hold buttons while on the display there will be no SAF-e symbol then release;
enter the correct code in the described sequence.