VW Passat repair


+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
+ 13. Wheels and tires
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
- 16. Body
   + 16.1. General information
   16.2. Care of a body
   + 16.3. Insignificant damages of a body
   16.4. Considerable damages of a body
   16.5. Moldings, facing of wheel niches
   + 16.6. Cowl elements
   16.7. Forward and back bumpers
   16.8. Forward cross-section beam of a body
   16.9. Forward wing
   + 16.10. Luggage carrier elements
   + 16.11. Elements of a back door (cars with a body the versatile person)
   16.12. Hinges and locks
   16.13. Elimination of jingle of doors
   + 16.14. Elements of a forward door
   + 16.15. Elements of a back door
   16.16. Internal rear-view mirror
   16.17. Central console
   + 16.18. Combination of devices
   16.19. The receiver with coding system
   16.20. Perchatochny box
   16.21. Dashboard
   + 16.22. Forward seats
   + 16.23. Back sitting
   + 16.24. Seat belts
+ 17. Electric circuits


Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Body>> Forward and back bumpers
Removal of a front bumper make in the following order:
– unscrew three screws of fastening of the bottom lattice of an air inlet;
– disconnect ledges of fastening and remove a lattice, having lowered it down;

Fig. 16.6. Details of a front bumper: 1–bumper basis; 2–arm; 3–bolt; 4–sealing washer; 5–the directing; 6–consolidation; 7–strut pin; 8–bumper; 9–spoiler


– disconnect and remove pins 7 (fig. 16.6) of the strut, fixing a bumper 8 to the loose leaf of a wheel arch;
– disconnect contact sockets of fog lights;
– unscrew bolts of fastening of a bumper, without turning on a bolt of fastening of the engine to a body;
– having shifted forward, remove a bumper.
Installation carry out to sequences, return to removal.
Tighten bolts of fastening of a bumper the demanded moment.
Check work of washers of headlights.
Removal of a rear bumper make in the following order:
– from below unscrew five screws of fastening of a bumper to a body;
– remove a covering of a luggage compartment then unscrew four bolts of fastening;

Fig. 16.7. Details of a rear bumper: 1, 2 – bolts; 3–arm; 4–bumper basis; 5–sealing washer; 6–the directing; 7–bumper; 8–screw; 9–an arm (for a body the versatile person)


– remove a bumper 7 (fig. 16.7) .
Installation carry out to sequences, return to removal.
Tighten bolts of fastening of a bumper the demanded moment.