VW Passat repair+ 1. Ekspluatatsiiya of the car + 2. Maintenance + 3. Engines + 4. Cooling system + 5. Power supply system + 6. Ignition system + 7. Coupling + 8. Transmission + 9. Drive of forward wheels + 10. Suspension brackets + 11. Steering - 12. Brake system 12.1. Technical characteristics 12.2. General information + 12.3. Maintenance + 12.4. Replacement of forward brake shoes 12.5. Replacement of a forward support 12.6. Replacement of a forward brake disk 12.7. Replacement of a brake drum and back brake shoes on brakes of drum-type type 12.8. Wheel cylinder of the back brake mechanism 12.9. Replacement of brake shoes on back disk brakes 12.10. Replacement of a support of the back brake mechanism 12.11. Pressure regulator 12.12. Main brake cylinder 12.13. Tubes and hoses of brake system 12.14. Air removal from a hydraulic actuator of brake system + 12.15. Anti-blocking system of brakes (ABS) 12.16. Brake pedal 12.17. Lever of the parking brake 12.18. Cables of the parking brake 12.19. Adjustment of the parking brake 12.20. Vacuum amplifier of brakes 12.21. Stoplight switch 12.22. Elimination of noise of brakes + 13. Wheels and tires + 14. Systems of heating, ventilation and conditioning + 15. Electric equipment + 16. Body + 17. Electric circuits Mostbet - onlayn bahis və casino oyunlarındakı lider platformdur. 
|
Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Brake system>> Replacement of a forward support
Removal of a forward support carry out in the following order:
will hang out a forward part of the car and fix on basic racks;
remove forward wheels;
press a brake hose;
weaken, without turning on completely, connections of a brake hose to a support;
on a support of VW unscrew two bolts of fastening of a support;
on a support of Girling unscrew bolts of fastening of directing fingers, holding directing finger from a provorachivaniye a wrench (see
fig. 12.5
);
remove forward brake shoes;
rotating a support, disconnect it from a brake hose. Muffle a brake hose a stopper;
if necessary unscrew a bolt and remove the holder of blocks from a rotary fist.
Dismantling of a support carry out in the following order:
clear a support of a dust and dirt;
submitted to the brake cylinder through an opening for connection of a brake hose by air under low pressure take the piston from a support, having established thus instead of brake shoes wooden whetstone
(fig. 12.8)
;
remove a dustproof cover from a flute in the piston and a sealing ring from a flute in a support opening
(fig. 12.9)
;
wash out all details in methyl alcohol or pure brake liquid and wipe them;
at assembly of a support use a new sealing ring of the piston and a dustproof cover;
put on a piston opening in a support and a sealing ring pure brake liquid. Establish a sealing ring in a support opening;
establish a dustproof cover on the piston so that the cover in the internal diameter entered into a piston flute; insert the piston into a support and at the same time insert an external edge of a dustproof cover into a support before its fixing.
Installation of a forward support carry out in the following order:
if the holder of blocks acted in film, establish it on a rotary fist and fix bolts the regulated moment;
screw a support on a brake hose;
establish brake shoes;
establish a support on the holder of blocks;
remove air from brake system;
establish a wheel and lower the car.
|
|