VW Passat repair


+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
- 11. Steering
   11.1. General information
   11.2. Steering wheel
   + 11.3. Steering column
   11.4. Regulator of provision of height of a steering column
   + 11.5. Replacement of protective covers of steering transfer
   + 11.6. Steering transfer
   11.7. Adjustment of position of steering drafts
   11.8. Replacement of steering drafts
   11.9. Replacement of tips of steering drafts
   + 11.10. Adjustment люфта steering transfer
   11.11. Replacement of liquid of the hydraulic amplifier of a steering
   + 11.12. Pump of the hydraulic booster of a steering
   11.13. Adjustment of a tension of belts of drives of auxiliary units
+ 12. Brake system
+ 13. Wheels and tires
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
+ 16. Body
+ 17. Electric circuits


Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Steering>> Replacement of tips of steering drafts
Replacement make in the following order:
– will hang out and fix on basic racks a forward part of the car;
– remove the corresponding wheel;
– measure visible number of rounds of a carving on inside of a tip of steering draft for correct installation of a tip of steering draft;
– weaken a lock-nut of fixing of steering draft;

Fig. 11.11. Removal of the spherical hinge of steering draft from a rotary fist


– unscrew a nut of fastening of the spherical hinge of a tip of steering bent for to a rotary fist and, using a stripper of spherical hinges, take the hinge of steering draft from a rotary fist (see fig. 11.11 );
– keeping from a provorachivaniye steering draft, unscrew a tip of steering draft from steering draft;
– screw a lock-nut and a tip of steering draft — thus the visible quantity of rounds of a carving on steering draft should correspond to the predemountable;
– connect the spherical hinge of steering draft to the lever of a rotary fist and tighten a lock-nut, previously having replaced it with the new.







429b39f6