VW Passat repair


+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
- 11. Steering
   11.1. General information
   11.2. Steering wheel
   + 11.3. Steering column
   11.4. Regulator of provision of height of a steering column
   + 11.5. Replacement of protective covers of steering transfer
   + 11.6. Steering transfer
   11.7. Adjustment of position of steering drafts
   11.8. Replacement of steering drafts
   11.9. Replacement of tips of steering drafts
   + 11.10. Adjustment люфта steering transfer
   11.11. Replacement of liquid of the hydraulic amplifier of a steering
   + 11.12. Pump of the hydraulic booster of a steering
   11.13. Adjustment of a tension of belts of drives of auxiliary units
+ 12. Brake system
+ 13. Wheels and tires
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
+ 16. Body
+ 17. Electric circuits


Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Steering>> Replacement of steering drafts
Replacement make in the following order:
– remove steering transfer in connection with probability of damage of a gear lath and a drive gear wheel;
– release collars and shift on steering draft a protective cover;
– wipe visible traces of greasing;

Fig. 11.16. Fastening of steering transfer in a vice


– fix in a vice with soft sponges steering transfer (fig. 11.16) and, rotating a drive gear wheel, move a gear lath to the relevant party;
– establish on the verge of the case of the spherical hinge a key on 32 mm and turn out steering draft;
– clear of old greasing a carving in an internal part of a gear lath;

Fig. 11.17. Carving cleaning in a gear lath with application of tap М14х1,5


– the corresponding tap clear a carving (М14х1,5) in a gear lath (fig. 11.17) ;

Fig. 11.18. A place of drawing of a drop of the means interfering an otvorachivaniye of steering draft


– on the second round of a carving of a gear lath put one drop of means D-6 interfering an otvorachivaniye of steering draft (fig. 11.18) ;
– screw steering draft in a gear lath;

Fig. 11.19. Adjusting extent of the left steering draft


– before installation of the left draft be convinced that the size between a basic end face of the internal hinge and an axis of the spherical hinge of a tip the helmsman of draft is equal 395 mm (fig. 11.19) ;
– grease a gear lath with AOF 063 000 04 type greasing;
– establish a protective cover on steering transfer and fix collars.