VW Passat repair


+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
- 5. Power supply system
   + 5.1. Power supply systems of petrol engines
   - 5.2. Power supply system of the diesel engine
      5.2.1. Specifications and characteristics
      5.2.2. General information
      5.2.3. Air filter
      5.2.4. Accelerator cable (AAZ engine)
      5.2.5. Fuel level sensor
      5.2.6. Fuel tank
      5.2.7. Fuel pump of a high pressure
      5.2.8. Check and adjustment of the maximum turns of the engine (AAZ engine)
      5.2.9. Check and adjustment of the raised turns of idling of the AAZ engine
      5.2.10. Check and adjustment of the moment of injection of fuel of the fuel pump of a high pressure of the AAZ engine
      5.2.11. Fuel nozzles
      5.2.12. Electromagnetic valve of a stop of the engine
      5.2.13. Elements of a control system of the diesel engine (1Z, AHU and AFN)
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
+ 13. Wheels and tires
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
+ 16. Body
+ 17. Electric circuits


Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Power supply system>> Power supply system of the diesel engine>> Accelerator cable (AAZ engine)
       PREVENTION
At work with a cable it is necessary to consider that the cable very fragile and it cannot be bent. A cable which was exposed to a peregibaniye, it is necessary to replace.

Removal and installation of a cable of an accelerator carry out in the following order:
remove the bottom furnish of the dashboard under a steering column;
slightly press a pedal of an accelerator and disconnect an accelerator cable from an accelerator pedal;
on a partition of a motor compartment unscrew fastening of a sealing ring of a cable of an accelerator;
in a motor compartment remove a bracket and disconnect the end of a cable of an accelerator from the lever of the fuel pump of a high pressure;
shift condensing rubber ring and take a cover of a cable of an accelerator from an arm;
release an accelerator cable from brackets of fastening and take it in a motor compartment;
installation of a cable of an accelerator is made in sequence, return to removal.