VW Passat repair


+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
+ 13. Wheels and tires
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
- 16. Body
   + 16.1. General information
   16.2. Care of a body
   + 16.3. Insignificant damages of a body
   16.4. Considerable damages of a body
   16.5. Moldings, facing of wheel niches
   + 16.6. Cowl elements
   16.7. Forward and back bumpers
   16.8. Forward cross-section beam of a body
   16.9. Forward wing
   + 16.10. Luggage carrier elements
   + 16.11. Elements of a back door (cars with a body the versatile person)
   16.12. Hinges and locks
   16.13. Elimination of jingle of doors
   + 16.14. Elements of a forward door
   + 16.15. Elements of a back door
   16.16. Internal rear-view mirror
   16.17. Central console
   + 16.18. Combination of devices
   16.19. The receiver with coding system
   16.20. Perchatochny box
   16.21. Dashboard
   + 16.22. Forward seats
   + 16.23. Back sitting
   + 16.24. Seat belts
+ 17. Electric circuits


429b39f6





Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Body>> Dashboard
At removal it is required to drill bolts of fastening of a steering column (cut-off bolts) and to lower a column. Work accurately to avoid damage of numerous vpressovanny pins and other details of fastening.
Preparatory activities for dashboard removal:
– remove average section of the dashboard;
– remove an overlay of a powder of a door in a doorway;
– remove the lever of a cowl and disconnect a cowl cable;

Fig. 16.70. Removal of the bottom overlay of a forward rack and doorway: 1–spring bracket; 2–collar; 3–bottom overlay of a forward rack and doorway


– remove the bottom decorative overlay of a forward rack and a doorway (fig. 16.70) , having unscrewed screws of its fastening and having removed spring brackets;

Fig. 16.71. Ware boxes on which the passive system of safety is not provided at failure: 1, 3 – screws; 2–percussion cap; 4–assembly ledge; 5–a pin with a bracket


Fig. 16.72. Removal of a nadkolenny partition: 1–arm; 2–bolt (moment of an inhaling of 10 N · м); 3–arm; 4, 8, 11 – a bolt, the moment of an inhaling of 10 N · m; 5, 12 – a face decorative cover; 6–right nadkolenny partition; 7–cover; 9–left nadkolenny partition; 10-screw


– remove trays for storage of trifles (fig. 16.71) or a nadkolenny partition 6 and 9 (fig. 16.72) . For removal of a nadkolenny partition remove the left slip, release from latches and remove face decorative covers, having turned them at an angle 90 °. Then remove the bottom overlay of the forward panel of a niche of a wheel and a doorway;
– prepare new cut-off bolts for installation of the case of a steering column.
Removal make in the following order:

Fig. 16.73. Removal of a decorative slip: 1–control panel; 2–decorative slip; 3–body


– unscrew screws and push inside the panel 3 (fig. 16.73) of management of a heater and body ventilation;
– drill srezny bolts of fastening of a steering column and lower a column;

Fig. 16.74. Dashboard removal: 1–socket of a plait of wires; 2–connectors with "weight"; 3–I will corrode dashboard conductings on the assembly block


– disconnect plaits of conducting and connection with "weight" under the dashboard. Disconnect sockets of plaits of the dashboard from the assembly block 3 (fig. 16.74) of the relay and safety locks;

Fig. 16.75. Dashboard fastening: 1,2-clamps; 3–caps; 4–arm; 5–adjusting pin.


– unscrew screws on both parties of the dashboard, previously having got caps 3 (fig. 16.75) . Get clamps 1 and 2 from a wall of an air line which is behind the dashboard;

Fig. 16.76. Dashboard details: 1–dashboard basis; 2–perchatochny box; 3–central slip; 4–the central slip, 5 – a lateral slip


– disconnect and take aside the basic arms 4 connecting the dashboard and a tunnel of a body floor and remove the dashboard (fig. 16.76) .
Installation carry out upside-down. On the cars equipped with a cable of a drive of a speedometer, it is necessary to insert a cable from the back party of a speedometer. For this purpose temporarily disconnect a cable of a drive of a speedometer in the mixing air chamber which is under a cowl.
At installation of the dashboard be convinced of the correct installation of air lines on the heater case.