VW Passat repair
+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
- 13. Wheels and tires
13.1. Technical characteristics
13.2. Replacement of wheels
13.3. Wheel bolts
13.4. Running in of tires
13.5. Storage of tires
13.6. Balancing of wheels
13.7. Antisliding chains
13.8. Spare wheel
13.9. Pressure check in tires
13.10. Check of a profile of tires
13.11. Gate check
13.12. Check of radial and lateral palpation of tires
13.13. Check of radial and lateral palpation of disks
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
+ 16. Body
+ 17. Electric circuits
Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Wheels and tires>> Spare wheel
It is possible to establish a spare wheel both on a lobby, and on a back axis.
The spare wheel is intended only for short-term use and it is necessary to replace it with the usual as soon as possible.
After installation of a spare wheel pressure in its tire should make 4,2 kgfs/cm2.
With the established spare wheel it is impossible to exceed speed of 80 miles/h.
It is necessary to avoid the maximum acceleration of the car, intensive braking and sharp turns.
At installation of a spare wheel the road gleam under the corresponding axis decreases approximately by 30 mm.
It is forbidden to apply spare wheels of other types, rather than regulated specifically to this model of the car.
It is not allowed to establish two or more spare wheels.