VW Passat repair

+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
- 9. Drive of forward wheels
   9.1. General information
   9.2. Check of antisplash covers
   9.3. Removal and installation of a drive of forward wheels
   9.4. Removal and installation of the internal hinge
   9.5. Removal and installation of the external hinge
   9.6. Dismantling of the external hinge
   9.7. Dismantling of the internal hinge
   9.8. Quencher of krutilny fluctuations of a power shaft
   9.9. Epiploon of a flange of a semi-axis
   9.10. Malfunctions of power shafts
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
+ 13. Wheels and tires
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
+ 16. Body
+ 17. Electric circuits


Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Drive of forward wheels>> Dismantling of the external hinge
As spare parts to the hinge protective covers, washers, lubricant, a nut of a power shaft and spring lock rings are delivered.
Dismantling of the external hinge carry out in the following order:

Fig. 9.13. Extraction of spheres from a nave

mark the provision of a nave in relation to the hinge case; Turn a hinge nave in the case and serially take each sphere (fig. 9.13) . Stack spheres as their installation for the subsequent correct repeated installation;

Fig. 9.14. Combination of rectangular cracks of a separator with the hinge case

– turn a hinge separator so that two rectangular cracks were combined with the case, then take a separator and a nave (fig. 9.14) ;

Fig. 9.15. Extraction of a nave of the hinge from a separator

– arrange a nave in a separator so that one of parts of a nave entered into one of rectangular cracks in a separator. Turn a nave and take it from a separator (fig. 9.15) .
Assembly of the external hinge carry out in the following order:
– clear all details of the hinge and check their condition. In the presence of wear tracks or corrosion, replace the hinge assembled.
– put 45 g of greasing in the case of the hinge and establish a separator with a nave. Consistently insert spheres into a nave and, using in advance made labels, be convinced that a nave in a separator and the case are established correctly. Establish a new lock ring in a nave then put in the hinge case the greasing rest (45 g).