VW Passat repair


+ 1. Ekspluatatsiiya of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Power supply system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Drive of forward wheels
+ 10. Suspension brackets
+ 11. Steering
+ 12. Brake system
- 13. Wheels and tires
   13.1. Technical characteristics
   13.2. Replacement of wheels
   13.3. Wheel bolts
   13.4. Running in of tires
   13.5. Storage of tires
   13.6. Balancing of wheels
   13.7. Antisliding chains
   13.8. Spare wheel
   13.9. Pressure check in tires
   13.10. Check of a profile of tires
   13.11. Gate check
   13.12. Check of radial and lateral palpation of tires
   13.13. Check of radial and lateral palpation of disks
+ 14. Systems of heating, ventilation and conditioning
+ 15. Electric equipment
+ 16. Body
+ 17. Electric circuits


Repair B3-B4/Passat B3-B4 Volkswagen Passat>> Wheels and tires>> Check of radial and lateral palpation of disks

Fig. 13.2. Surfaces of measurement of palpation of a disk: N – radial palpation, S – lateral palpation


Fix a disk without the tire on an axis of the balancing device. Establish a measuring tip of the strelochny indicator at first on radial, and then on lateral internal surfaces of a disk on which the tire board (fig. 13.2) leans .

       NOTE
The most admissible radial palpation – 0,8 mm; the most admissible lateral palpation – 1,2 mm.

Hands slowly turn a disk of the balancing device, at the same time taking readings of the indicator. Thus do not consider a deviation of an arrow of the indicator from local ledges or deepenings on a disk.
If the maximum value of palpation exceeds admissible limits, replace a disk.

       NOTE
Maximum palpation of a steel disk: N = 0,6 mm, S = 0,8 mm. Maximum palpation of a cast disk: N = 0,5 mm, S = 0,5 mm.