Washing of system of cooling carry out in the following order:

– merge cooling liquid;

– establish a drain stopper of a radiator on a place and fill system of cooling with fresh water. For receiving the best result it is possible to use a special flushing additive.

– establish a cover of a broad tank;

– start the engine and warm up it to normal working temperature;

– switch off the engine, let's to it cool down and merge water from cooling system;

– repeat operation of washing of system of cooling until water will not pour out the pure;

– fill in in cooling system new cooling liquid;

– for washing of a radiator merge liquid from cooling system, then disconnect hoses from the basis and the top tank of a radiator. Insert a garden hose into the top branch pipe of a radiator, and pass water through a radiator while water will not leave pure a branch pipe in the radiator basis;

– for engine washing, insert a garden hose into the target canal of the thermostat and pass water via the engine while water will not leave pure the bottom hose;

– wash out a heater radiator, previously having opened the crane of a heater and having disconnected from a heater hoses. To one of unions connect a hose and wash out a stream at its finest until water will not follow from other union of the pure.